PJUMET-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1781858222	29 degC	73 %	1009 hPa	6 kmh	0 mm
1781856381	31.5 degC	63 %	1008 hPa	6 kmh	0 mm
1781854535	32 degC	60 %	1008 hPa	4 kmh	0 mm
1781852684	30 degC	67 %	1009 hPa	7 kmh	0.1 mm
1781811842	24.5 degC	87 %	1009 hPa	7 kmh	0 mm
1781809998	24.5 degC	88 %	1010 hPa	7 kmh	0 mm
1781808155	24 degC	98 %	1011 hPa	4 kmh	0 mm
1781806310	24.5 degC	96 %	1011 hPa	1 kmh	0 mm
1781804466	24.5 degC	97 %	1012 hPa	1 kmh	0 mm
1781802623	24.5 degC	98 %	1012 hPa	2 kmh	0 mm
1781800775	24.5 degC	98 %	1012 hPa	4 kmh	0 mm
1781798930	24.5 degC	98 %	1012 hPa	6 kmh	0 mm
1781797087	24.5 degC	99 %	1012 hPa	8 kmh	0 mm
1781795242	24.5 degC	99 %	1012 hPa	9 kmh	0 mm
1781793398	24.5 degC	99 %	1012 hPa	8 kmh	0 mm
1781791556	25 degC	99 %	1011 hPa	8 kmh	0.1 mm
1781783529	25.5 degC	92 %	1010 hPa	9 kmh	0.3 mm
1781781686	26.5 degC	85 %	1009 hPa	7 kmh	0.3 mm
1781779834	27.5 degC	80 %	1009 hPa	7 kmh	0 mm
1781777987	28 degC	75 %	1009 hPa	8 kmh	0 mm
1781776143	29 degC	72 %	1009 hPa	7 kmh	0 mm
1781774300	30 degC	68 %	1009 hPa	4 kmh	0 mm
1781772456	30.5 degC	65 %	1008 hPa	5 kmh	0 mm
1781770611	31 degC	63 %	1008 hPa	6 kmh	0 mm
1781768768	31.5 degC	62 %	1008 hPa	7 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)