PJUMET-5 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-5. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1781685372	25.5 degC	89 %	1010 hPa	3 kmh	0.2 mm
1781683529	25.5 degC	88 %	1011 hPa	0 kmh	0.2 mm
1781681686	25.5 degC	90 %	1011 hPa	1 kmh	0.2 mm
1781679843	26 degC	90 %	1011 hPa	2 kmh	0.2 mm
1781677998	26.5 degC	85 %	1011 hPa	5 kmh	0.2 mm
1781676154	27.5 degC	78 %	1011 hPa	12 kmh	0 mm
1781674309	29 degC	74 %	1011 hPa	9 kmh	0 mm
1781672465	30 degC	71 %	1012 hPa	6 kmh	0 mm
1781670621	30 degC	72 %	1012 hPa	5 kmh	0 mm
1781639145	23.5 degC	97 %	1012 hPa	3 kmh	0.3 mm
1781637298	23.5 degC	97 %	1012 hPa	7 kmh	0.1 mm
1781635453	24 degC	95 %	1012 hPa	7 kmh	0.1 mm
1781633606	25 degC	92 %	1012 hPa	6 kmh	0.1 mm
1781631759	26 degC	89 %	1012 hPa	4 kmh	0.1 mm
1781629911	26.5 degC	86 %	1013 hPa	3 kmh	0 mm
1781628062	27 degC	84 %	1013 hPa	3 kmh	0 mm
1781626213	27 degC	83 %	1013 hPa	5 kmh	0 mm
1781624362	27 degC	83 %	1013 hPa	5 kmh	0 mm
1781622514	27.5 degC	83 %	1013 hPa	4 kmh	0 mm
1781620669	27.5 degC	83 %	1012 hPa	3 kmh	0 mm
1781604165	30 degC	66 %	1008 hPa	7 kmh	0 mm
1781602316	30.5 degC	63 %	1008 hPa	9 kmh	0 mm
1781600468	31 degC	61 %	1008 hPa	5 kmh	0 mm
1781598621	30 degC	64 %	1008 hPa	6 kmh	0.1 mm
1781596768	30 degC	71 %	1008 hPa	5 kmh	0.1 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)