PJUMET-7 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-7. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1781519303	29.5 degC	70 %	1009 hPa	5 kmh	0 mm
1781517452	30 degC	68 %	1009 hPa	7 kmh	0 mm
1781515599	30 degC	69 %	1008 hPa	8 kmh	0 mm
1781513749	30 degC	69 %	1008 hPa	8 kmh	0 mm
1781511902	29.5 degC	71 %	1008 hPa	8 kmh	0 mm
1781511545	29.5 degC	71 %	1009 hPa	8 kmh	0 mm
1781509703	30 degC	70 %	1009 hPa	8 kmh	0.1 mm
1781507855	30.5 degC	70 %	1009 hPa	8 kmh	0.1 mm
1781506011	30.5 degC	70 %	1009 hPa	7 kmh	0 mm
1781504168	30 degC	71 %	1010 hPa	7 kmh	0 mm
1781475206	24.5 degC	98 %	1010 hPa	5 kmh	0 mm
1781473363	24.5 degC	98 %	1010 hPa	5 kmh	0 mm
1781471519	24.5 degC	98 %	1010 hPa	4 kmh	0.1 mm
1781469675	24.5 degC	100 %	1010 hPa	2 kmh	0.1 mm
1781467831	24.5 degC	99 %	1011 hPa	0 kmh	0.2 mm
1781465985	24.5 degC	99 %	1011 hPa	1 kmh	0.2 mm
1781464141	24.5 degC	99 %	1012 hPa	4 kmh	0.1 mm
1781462298	24 degC	99 %	1012 hPa	5 kmh	0.1 mm
1781460453	24 degC	99 %	1012 hPa	6 kmh	0 mm
1781458608	24.5 degC	98 %	1012 hPa	4 kmh	0 mm
1781456763	24.5 degC	98 %	1012 hPa	4 kmh	0 mm
1781454920	24.5 degC	98 %	1013 hPa	4 kmh	0 mm
1781453077	24.5 degC	99 %	1013 hPa	4 kmh	0 mm
1781451234	25 degC	98 %	1013 hPa	2 kmh	0 mm
1781449390	25 degC	98 %	1013 hPa	1 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)