PJUMET-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*
1777576954	25.5 degC	95 %	1010 hPa	5 kmh
1777575106	26.5 degC	91 %	1010 hPa	4 kmh
1777573253	26.5 degC	88 %	1010 hPa	6 kmh
1777571395	26.5 degC	87 %	1010 hPa	6 kmh
1777569536	27 degC	84 %	1010 hPa	5 kmh
1777567660	27.5 degC	83 %	1011 hPa	6 kmh
1777565815	27.5 degC	82 %	1011 hPa	6 kmh
1777563959	27.5 degC	81 %	1011 hPa	7 kmh
1777562111	28 degC	79 %	1011 hPa	7 kmh
1777560245	28.5 degC	78 %	1011 hPa	8 kmh
1777558400	28.5 degC	79 %	1010 hPa	8 kmh
1777555700	28.5 degC	79 %	1010 hPa	10 kmh
1776925312	33 degC	52 %	1007 hPa	9 kmh
1776916898	31.5 degC	58 %	1009 hPa	4 kmh
1776915045	30.5 degC	61 %	1009 hPa	3 kmh
1776913182	29.5 degC	66 %	1010 hPa	2 kmh
1776883258	23.5 degC	95 %	1008 hPa	2 kmh
1776881407	23.5 degC	94 %	1008 hPa	3 kmh
1776877699	24.5 degC	90 %	1009 hPa	3 kmh
1776874582	24.5 degC	88 %	1010 hPa	3 kmh
1776840353	31.5 degC	59 %	1007 hPa	11 kmh
1776838507	32 degC	57 %	1007 hPa	10 kmh
1776836663	32 degC	58 %	1008 hPa	8 kmh
1776834816	31.5 degC	59 %	1009 hPa	7 kmh
1776831106	31 degC	62 %	1010 hPa	5 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)