PJUMET-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*
1777573229	24.5 degC	99 %	1010 hPa	2 kmh
1777571371	24.5 degC	99 %	1010 hPa	2 kmh
1777569493	25 degC	99 %	1011 hPa	2 kmh
1777567636	25 degC	98 %	1011 hPa	2 kmh
1777565791	25 degC	98 %	1011 hPa	2 kmh
1777563935	25.5 degC	97 %	1011 hPa	2 kmh
1777562072	26 degC	94 %	1011 hPa	0 kmh
1777560221	26 degC	93 %	1011 hPa	0 kmh
1777558377	26 degC	93 %	1010 hPa	0 kmh
1777555668	26 degC	93 %	1010 hPa	1 kmh
1776916874	29 degC	78 %	1009 hPa	11 kmh
1776913156	29 degC	79 %	1009 hPa	7 kmh
1776883234	29.5 degC	73 %	1007 hPa	6 kmh
1776881377	29.5 degC	74 %	1007 hPa	7 kmh
1776879520	29.5 degC	75 %	1008 hPa	7 kmh
1776877675	29.5 degC	77 %	1008 hPa	7 kmh
1776874541	29.5 degC	73 %	1008 hPa	9 kmh
1776840328	29.5 degC	75 %	1007 hPa	13 kmh
1776838485	29 degC	77 %	1008 hPa	9 kmh
1776836640	29 degC	77 %	1008 hPa	7 kmh
1776834792	29 degC	78 %	1009 hPa	5 kmh
1776832928	28.5 degC	78 %	1009 hPa	4 kmh
1776831082	28.5 degC	80 %	1009 hPa	3 kmh
1776829236	28.5 degC	81 %	1010 hPa	2 kmh
1776761528	30 degC	68 %	1006 hPa	18 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)