PJUMET-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Hum*	Pres*	Wind*	Rain*
1781519293	27 degC	77 %	1010 hPa	0 kmh	0.2 mm
1781517442	27 degC	75 %	1010 hPa	2 kmh	0.1 mm
1781515590	27.5 degC	74 %	1010 hPa	7 kmh	0.1 mm
1781513740	28.5 degC	69 %	1009 hPa	5 kmh	0.2 mm
1781511883	30.5 degC	60 %	1008 hPa	7 kmh	0.3 mm
1781511537	30.5 degC	60 %	1008 hPa	7 kmh	0 mm
1781509694	30.5 degC	60 %	1009 hPa	9 kmh	0.1 mm
1781507846	31 degC	59 %	1009 hPa	8 kmh	0.1 mm
1781506003	31.5 degC	58 %	1010 hPa	8 kmh	0.1 mm
1781504160	32 degC	58 %	1010 hPa	8 kmh	0.1 mm
1781475198	24.5 degC	97 %	1011 hPa	5 kmh	0 mm
1781473354	24.5 degC	96 %	1011 hPa	5 kmh	0 mm
1781471510	24.5 degC	96 %	1011 hPa	5 kmh	0 mm
1781469667	24 degC	99 %	1011 hPa	4 kmh	0 mm
1781467823	24.5 degC	97 %	1011 hPa	2 kmh	0 mm
1781465976	24.5 degC	97 %	1011 hPa	1 kmh	0 mm
1781464133	24.5 degC	96 %	1012 hPa	2 kmh	0 mm
1781462289	24.5 degC	96 %	1012 hPa	3 kmh	0 mm
1781460444	24.5 degC	96 %	1012 hPa	4 kmh	0 mm
1781458599	24.5 degC	96 %	1012 hPa	5 kmh	0 mm
1781456755	25 degC	95 %	1012 hPa	4 kmh	0 mm
1781454911	25 degC	94 %	1013 hPa	5 kmh	0 mm
1781453069	25 degC	94 %	1013 hPa	5 kmh	0 mm
1781451226	25.5 degC	93 %	1013 hPa	3 kmh	0 mm
1781449382	25.5 degC	91 %	1013 hPa	1 kmh	0 mm

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)