PJUMET-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PJUMET-11. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Hum*	Pres*	Wind*
1777576960	27 degC	85 %	1009 hPa	7 kmh
1777575112	27.5 degC	84 %	1010 hPa	7 kmh
1777573258	27.5 degC	83 %	1010 hPa	8 kmh
1777571408	27.5 degC	82 %	1010 hPa	8 kmh
1777569543	28 degC	81 %	1011 hPa	9 kmh
1777567666	28.5 degC	80 %	1011 hPa	10 kmh
1777565821	29 degC	78 %	1011 hPa	9 kmh
1777563965	29 degC	78 %	1011 hPa	9 kmh
1777562118	29 degC	77 %	1011 hPa	10 kmh
1777560251	29 degC	76 %	1011 hPa	10 kmh
1777558406	29.5 degC	75 %	1010 hPa	10 kmh
1777555706	29.5 degC	72 %	1009 hPa	11 kmh
1776925318	38 degC	29 %	1006 hPa	9 kmh
1776916904	35.5 degC	35 %	1008 hPa	6 kmh
1776913188	32.5 degC	43 %	1009 hPa	8 kmh
1776883273	23.5 degC	88 %	1008 hPa	3 kmh
1776881417	23.5 degC	87 %	1008 hPa	3 kmh
1776879559	24 degC	87 %	1008 hPa	3 kmh
1776877705	24 degC	86 %	1009 hPa	3 kmh
1776874588	24 degC	86 %	1009 hPa	3 kmh
1776840359	35.5 degC	38 %	1007 hPa	14 kmh
1776838513	36 degC	39 %	1007 hPa	13 kmh
1776836669	36 degC	39 %	1008 hPa	11 kmh
1776834823	36.5 degC	39 %	1008 hPa	9 kmh
1776832977	36 degC	40 %	1009 hPa	8 kmh

*Used Equation Coefficients:

Temp: 0, 0.5, -20

Hum: 0, 1, 0

Pres: 0, 1, 800

Wind: 0, 1, 0

Rain: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)