This is the latest recevied telemetry packets stored in our database for station/object PU4AAP-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
RxTraffic*
TxTraffic*
RxDrop*
RSSI*
Voltage*
1761497005
71 Pkt
11 Pkt
0 Pkt
-78 dBm
14.85 V
1761495172
0 Pkt
0 Pkt
0 Pkt
-78 dBm
14.87 V
1761254274
17 Pkt
4 Pkt
0 Pkt
-80 dBm
14.85 V
1761252447
43 Pkt
24 Pkt
0 Pkt
-79 dBm
14.85 V
1761247496
1 Pkt
0 Pkt
0 Pkt
-75 dBm
14.89 V
1761213165
144 Pkt
31 Pkt
6 Pkt
-80 dBm
14.89 V
1761211324
0 Pkt
2 Pkt
0 Pkt
-77 dBm
14.89 V
1760703530
76 Pkt
24 Pkt
0 Pkt
-75 dBm
14.83 V
1760699858
81 Pkt
67 Pkt
6 Pkt
-75 dBm
14.87 V
1760693211
0 Pkt
1 Pkt
0 Pkt
-74 dBm
14.87 V
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)