LU9QSA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU9QSA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1757875654	0 Pkt	0 Pkt	-72 dBm	11.65 V
1757873760	10 Pkt	19 Pkt	-69 dBm	11.65 V
1757871935	11 Pkt	15 Pkt	-70 dBm	11.65 V
1757870111	14 Pkt	6 Pkt	-69 dBm	11.65 V
1757868288	15 Pkt	0 Pkt	-70 dBm	11.65 V
1757866465	18 Pkt	0 Pkt	-72 dBm	11.65 V
1757864642	14 Pkt	0 Pkt	-70 dBm	11.63 V
1757862817	17 Pkt	0 Pkt	-67 dBm	11.63 V
1757860993	20 Pkt	0 Pkt	-66 dBm	11.65 V
1757859168	14 Pkt	0 Pkt	-67 dBm	11.65 V
1757857354	14 Pkt	0 Pkt	-68 dBm	11.65 V
1757855523	18 Pkt	1 Pkt	-68 dBm	11.65 V
1757851875	22 Pkt	0 Pkt	-70 dBm	11.65 V
1757850051	15 Pkt	0 Pkt	-66 dBm	11.65 V
1757848228	18 Pkt	0 Pkt	-66 dBm	11.65 V
1757846404	13 Pkt	0 Pkt	-67 dBm	11.65 V
1757844581	19 Pkt	0 Pkt	-67 dBm	11.65 V
1757842758	19 Pkt	0 Pkt	-68 dBm	11.65 V
1757840934	14 Pkt	0 Pkt	-67 dBm	11.65 V
1757839111	18 Pkt	0 Pkt	-69 dBm	11.63 V
1757837287	20 Pkt	0 Pkt	-67 dBm	11.65 V
1757835464	21 Pkt	1 Pkt	-67 dBm	11.65 V
1757833640	16 Pkt	1 Pkt	-66 dBm	11.65 V
1757831834	21 Pkt	0 Pkt	-67 dBm	11.61 V
1757829992	18 Pkt	1 Pkt	-68 dBm	11.65 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)