YH0AA Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YH0AA. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Pressure*
1781409075	43 °C	1008 hPa
1781407175	43 °C	1008 hPa
1781405275	42 °C	1008 hPa
1781403375	42 °C	1008 hPa
1781401475	42 °C	1008 hPa
1781399575	42 °C	1008 hPa
1781397675	42 °C	1008 hPa
1781395775	41 °C	1008 hPa
1781393875	41 °C	1008 hPa
1781391975	41 °C	1007 hPa
1781390075	41 °C	1007 hPa
1781388175	41 °C	1007 hPa
1781386275	42 °C	1007 hPa
1781384375	41 °C	1006 hPa
1781382475	42 °C	1006 hPa
1781380575	42 °C	1007 hPa
1781378675	42 °C	1007 hPa
1781376775	42 °C	1007 hPa
1781374875	42 °C	1007 hPa
1781372975	42 °C	1008 hPa
1781371075	42 °C	1008 hPa
1781369629	42 °C	1008 hPa
1781367729	42 °C	1008 hPa
1781365829	42 °C	1009 hPa
1781363929	42 °C	1009 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)