DB0MEG-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB0MEG-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1776677898	969.3 hPa	8.3 C deg	62.8 %	1018.9 hPa	0 C deg
1776676093	969.4 hPa	8.1 C deg	62.7 %	1019 hPa	0 C deg
1776674293	969.4 hPa	8 C deg	62.7 %	1019 hPa	0 C deg
1776674293	969.4 hPa	8 C deg	62.7 %	1019 hPa	0 C deg
1776672500	969.3 hPa	8.2 C deg	62 %	1018.9 hPa	0 C deg
1776672500	969.3 hPa	8.2 C deg	62 %	1018.9 hPa	0 C deg
1776670709	969.3 hPa	8.4 C deg	61.9 %	1019 hPa	0 C deg
1776670703	969.3 hPa	8.4 C deg	61.9 %	1019 hPa	0 C deg
1776668893	969.3 hPa	8.7 C deg	61.2 %	1018.8 hPa	0 C deg
1776667093	969.2 hPa	8.8 C deg	61 %	1018.7 hPa	0 C deg
1776665293	969.2 hPa	8.9 C deg	61.1 %	1018.7 hPa	0 C deg
1776663499	969.2 hPa	9 C deg	60.9 %	1018.6 hPa	0 C deg
1776663493	969.2 hPa	9 C deg	60.9 %	1018.6 hPa	0 C deg
1776661702	969.1 hPa	9.2 C deg	61.3 %	1018.5 hPa	0 C deg
1776661696	969.1 hPa	9.2 C deg	61.3 %	1018.5 hPa	0 C deg
1776659899	969.2 hPa	9.3 C deg	61.6 %	1018.6 hPa	0 C deg
1776659893	969.2 hPa	9.3 C deg	61.6 %	1018.6 hPa	0 C deg
1776658102	969.1 hPa	9.4 C deg	62.8 %	1018.5 hPa	0 C deg
1776656293	969.2 hPa	9.6 C deg	62.7 %	1018.6 hPa	0 C deg
1776654492	969.3 hPa	9.7 C deg	62.4 %	1018.7 hPa	0 C deg
1776652703	969.4 hPa	9.8 C deg	62.6 %	1018.8 hPa	0 C deg
1776650892	969.5 hPa	9.9 C deg	63.1 %	1018.8 hPa	0 C deg
1776649091	969.6 hPa	10 C deg	63.2 %	1018.9 hPa	0 C deg
1776647297	969.5 hPa	10.1 C deg	63.3 %	1018.8 hPa	0 C deg
1776647291	969.5 hPa	10.1 C deg	63.3 %	1018.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)