DO3FMO-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DO3FMO-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	eGAS*	Temp.out*
1753529454	993.7 hPa	25 C deg	56.5 %	73 -	0 C deg
1753527654	993.9 hPa	25 C deg	55.5 %	75 -	0 C deg
1753524053	994.2 hPa	25.1 C deg	55.4 %	74 -	0 C deg
1753522253	994.5 hPa	25.3 C deg	54.9 %	74 -	0 C deg
1753520453	994.2 hPa	25.5 C deg	54.5 %	73 -	0 C deg
1753518653	994.1 hPa	25.6 C deg	54.6 %	72 -	0 C deg
1753516853	993.9 hPa	25.4 C deg	55.2 %	72 -	0 C deg
1753515053	993.9 hPa	25.7 C deg	54.8 %	71 -	0 C deg
1753513253	993.8 hPa	25.2 C deg	55.8 %	71 -	0 C deg
1753511453	993.7 hPa	24.8 C deg	56.6 %	72 -	0 C deg
1753509653	993.9 hPa	24.7 C deg	56.5 %	72 -	0 C deg
1753507852	994.2 hPa	24.8 C deg	56.3 %	72 -	0 C deg
1753506066	994.2 hPa	24.8 C deg	56.2 %	72 -	0 C deg
1753506052	994.2 hPa	24.8 C deg	56.2 %	72 -	0 C deg
1753504252	994.2 hPa	24.7 C deg	56.5 %	72 -	0 C deg
1753502452	994.1 hPa	24.9 C deg	56 %	72 -	0 C deg
1753500652	994.1 hPa	24.9 C deg	56 %	72 -	0 C deg
1753498851	994 hPa	24.9 C deg	56 %	72 -	0 C deg
1753497051	994.1 hPa	24.9 C deg	55.9 %	71 -	0 C deg
1753495261	994.2 hPa	24.9 C deg	55.9 %	71 -	0 C deg
1753493450	994.3 hPa	24.8 C deg	55.9 %	71 -	0 C deg
1753489850	994.3 hPa	24.7 C deg	56 %	71 -	0 C deg
1753488049	994.3 hPa	24.8 C deg	55.6 %	71 -	0 C deg
1753486263	994.3 hPa	24.7 C deg	55.7 %	71 -	0 C deg
1753486249	994.3 hPa	24.7 C deg	55.7 %	71 -	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

eGAS: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)