KK4LYY-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4LYY-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1753599517	10 Pkts	10 Pkts	2 Pkts	21 C
1753595917	7 Pkts	7 Pkts	2 Pkts	21 C
1753592317	19 Pkts	18 Pkts	5 Pkts	21 C
1753588717	9 Pkts	9 Pkts	2 Pkts	21 C
1753585117	17 Pkts	17 Pkts	2 Pkts	21 C
1753581517	16 Pkts	15 Pkts	1 Pkts	21 C
1753577917	12 Pkts	12 Pkts	1 Pkts	21 C
1753574317	23 Pkts	22 Pkts	8 Pkts	20 C
1753570717	31 Pkts	28 Pkts	9 Pkts	21 C
1753567135	30 Pkts	26 Pkts	8 Pkts	21 C
1753563518	41 Pkts	40 Pkts	19 Pkts	21 C
1753559943	34 Pkts	33 Pkts	5 Pkts	20 C
1753556317	33 Pkts	33 Pkts	11 Pkts	22 C
1753552717	41 Pkts	40 Pkts	18 Pkts	22 C
1753549118	45 Pkts	44 Pkts	21 Pkts	21 C
1753533211	41 Pkts	41 Pkts	8 Pkts	21 C
1753529611	45 Pkts	45 Pkts	9 Pkts	20 C
1753526011	58 Pkts	58 Pkts	7 Pkts	20 C
1753522411	42 Pkts	42 Pkts	7 Pkts	20 C
1753518811	41 Pkts	41 Pkts	9 Pkts	20 C
1753515211	29 Pkts	29 Pkts	8 Pkts	20 C
1753511611	39 Pkts	39 Pkts	8 Pkts	20 C
1753508011	75 Pkts	75 Pkts	14 Pkts	20 C
1753504411	45 Pkts	44 Pkts	9 Pkts	20 C
1753500812	23 Pkts	23 Pkts	4 Pkts	20 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)