YM4KIZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM4KIZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1757641728	19 Pkt	0 Pkt	31 dBm	11.81 V
1757640718	18 Pkt	0 Pkt	31 dBm	11.85 V
1757638699	15 Pkt	0 Pkt	31 dBm	11.92 V
1757636680	18 Pkt	1 Pkt	31 dBm	11.87 V
1757635683	14 Pkt	0 Pkt	31 dBm	12 V
1757634660	15 Pkt	0 Pkt	31 dBm	11.96 V
1757633652	21 Pkt	0 Pkt	31 dBm	12.02 V
1757632641	26 Pkt	0 Pkt	31 dBm	12.02 V
1757631630	28 Pkt	0 Pkt	31 dBm	11.92 V
1757630620	19 Pkt	1 Pkt	31 dBm	12.08 V
1757629611	17 Pkt	0 Pkt	31 dBm	12.1 V
1757627595	18 Pkt	0 Pkt	31 dBm	12.12 V
1757624566	15 Pkt	0 Pkt	31 dBm	12.18 V
1757623558	13 Pkt	0 Pkt	31 dBm	12.2 V
1757622548	23 Pkt	0 Pkt	31 dBm	12.22 V
1757621537	17 Pkt	1 Pkt	31 dBm	12.08 V
1757620527	21 Pkt	1 Pkt	31 dBm	12.24 V
1757619518	18 Pkt	0 Pkt	31 dBm	12.26 V
1757617500	20 Pkt	0 Pkt	31 dBm	12.3 V
1757616492	15 Pkt	0 Pkt	31 dBm	12.14 V
1757614473	22 Pkt	0 Pkt	31 dBm	12.33 V
1757613462	21 Pkt	0 Pkt	31 dBm	12.37 V
1757612453	34 Pkt	0 Pkt	31 dBm	12.37 V
1757611441	26 Pkt	0 Pkt	31 dBm	12.24 V
1757610429	19 Pkt	0 Pkt	31 dBm	12.43 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)