SK4KO-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK4KO-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1753786239	978.1 hPa	25.1 C deg	1003 hPa	0 C deg
1753784439	978.3 hPa	25.1 C deg	1003.3 hPa	0 C deg
1753782639	978.4 hPa	25.1 C deg	1003.4 hPa	0 C deg
1753780838	978.6 hPa	25.1 C deg	1003.6 hPa	0 C deg
1753777238	978.6 hPa	25.1 C deg	1003.6 hPa	0 C deg
1753775439	979.3 hPa	25.2 C deg	1004.2 hPa	0 C deg
1753771838	980.5 hPa	25.2 C deg	1005.5 hPa	0 C deg
1753766437	981.4 hPa	25.3 C deg	1006.4 hPa	0 C deg
1753764638	981.7 hPa	25.3 C deg	1006.7 hPa	0 C deg
1753762838	981.7 hPa	25.3 C deg	1006.7 hPa	0 C deg
1753757438	982.2 hPa	25.3 C deg	1007.2 hPa	0 C deg
1753755637	982.6 hPa	25.3 C deg	1007.6 hPa	0 C deg
1753753836	982.7 hPa	25.3 C deg	1007.7 hPa	0 C deg
1753752037	982.8 hPa	25.3 C deg	1007.9 hPa	0 C deg
1753744836	983.2 hPa	25.6 C deg	1008.2 hPa	0 C deg
1753743037	983.4 hPa	25.8 C deg	1008.4 hPa	0 C deg
1753741237	983.5 hPa	26 C deg	1008.5 hPa	0 C deg
1753737647	983.5 hPa	26.5 C deg	1008.4 hPa	0 C deg
1753734036	983.4 hPa	27.2 C deg	1008.3 hPa	0 C deg
1753726835	983.2 hPa	28.7 C deg	1008 hPa	0 C deg
1753723236	983.2 hPa	28.9 C deg	1008 hPa	0 C deg
1753710634	983.5 hPa	30.9 C deg	1008.1 hPa	0 C deg
1753705234	983.7 hPa	32.9 C deg	1008.1 hPa	0 C deg
1753703434	983.9 hPa	29.1 C deg	1008.6 hPa	0 C deg
1753701635	984 hPa	29.4 C deg	1008.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)