DF2ET-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF2ET-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Elevation*	Azimuth*	Skew*	Speed*	Course*
1784690644	1.5 deg	158 deg	4.1 deg	0 km/h	286 deg
1784689445	1.5 deg	158 deg	4.1 deg	0 km/h	110 deg
1784688845	1.5 deg	158 deg	4.1 deg	0 km/h	289 deg
1784687645	1.5 deg	158 deg	4.1 deg	0 km/h	243 deg
1784687044	1.5 deg	158 deg	4.1 deg	0 km/h	230 deg
1784685844	1.5 deg	158 deg	4.1 deg	0 km/h	297 deg
1784685244	1.5 deg	158 deg	4.1 deg	0 km/h	303 deg
1784684044	1.5 deg	158 deg	4.1 deg	0 km/h	271 deg
1784683445	1.5 deg	158 deg	4.1 deg	0 km/h	166 deg
1784682245	1.5 deg	158 deg	4.1 deg	0 km/h	109 deg
1784681644	1.5 deg	158 deg	4.1 deg	0 km/h	212 deg
1784680445	1.5 deg	158 deg	4.1 deg	0 km/h	99 deg
1784679845	1.5 deg	158 deg	4.1 deg	0 km/h	69 deg
1784678645	1.5 deg	158 deg	4.1 deg	2 km/h	263 deg
1784678044	1.5 deg	158 deg	4.1 deg	0 km/h	81 deg
1784676845	1.5 deg	158 deg	4.1 deg	0 km/h	70 deg
1784676246	1.5 deg	158 deg	4.1 deg	0 km/h	53 deg
1784675045	1.5 deg	158 deg	4.1 deg	0 km/h	360 deg
1784674444	1.5 deg	158 deg	4.1 deg	0 km/h	358 deg
1784673244	1.5 deg	158 deg	4.1 deg	0 km/h	348 deg
1784672644	1.5 deg	158 deg	4.1 deg	0 km/h	73 deg
1784670844	1.5 deg	158 deg	4.1 deg	1 km/h	76 deg
1784669644	1.5 deg	158 deg	4.1 deg	5 km/h	94 deg
1784669044	1.5 deg	158 deg	4.1 deg	0 km/h	58 deg
1784667845	1.5 deg	158 deg	4.1 deg	0 km/h	42 deg

*Used Equation Coefficients:

Elevation: 0, 1, 0

Azimuth: 0, 1, 0

Skew: 0, 1, 0

Speed: 0, 1, 0

Course: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)