VA7MWZ-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VA7MWZ-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Batt*	OTemp*	OHumd*	BTemp*	X*
1780592390	78.4 %	16 C	66 %	16 C	0.1 Unit
1780590590	78.7 %	15.3 C	68.6 %	16 C	0.1 Unit
1780588790	79 %	14.6 C	69.2 %	16 C	0.1 Unit
1780586990	79.3 %	14.7 C	69.5 %	16 C	0.1 Unit
1780585189	79.6 %	14.5 C	69.5 %	16 C	0.1 Unit
1780583389	79.9 %	14.6 C	70.8 %	16 C	0.1 Unit
1780581589	80.3 %	14.6 C	72 %	16 C	0.1 Unit
1780579789	80.5 %	14.6 C	71.2 %	16 C	0.1 Unit
1780577989	80.8 %	14 C	70.9 %	16 C	0.1 Unit
1780576190	81.1 %	14.7 C	68.9 %	16 C	0.1 Unit
1780574389	81.4 %	14.8 C	68.5 %	16 C	0.1 Unit
1780572589	81.7 %	15.3 C	67.1 %	16 C	0.1 Unit
1780570789	81.9 %	16 C	64.4 %	16 C	0.1 Unit
1780568990	82.2 %	15.9 C	62.3 %	16 C	0.1 Unit
1780567189	82.5 %	16.5 C	60 %	16 C	0.1 Unit
1780565390	82.8 %	16 C	58.4 %	16 C	0.1 Unit
1780563589	83.1 %	15.6 C	58 %	16 C	0.1 Unit
1780561789	83.4 %	16.7 C	55.9 %	16 C	0.1 Unit
1780559990	83.7 %	16.5 C	55.2 %	16 C	0.1 Unit
1780558189	83.9 %	17.2 C	54.4 %	16 C	0.1 Unit
1780556389	84.2 %	17.4 C	54.7 %	16 C	0.1 Unit
1780554589	84.5 %	17.4 C	54.2 %	16 C	0.1 Unit
1780552789	84.8 %	18 C	51.6 %	16 C	0.1 Unit
1780550989	85.1 %	18.1 C	49.9 %	16 C	0.1 Unit
1780549189	85.3 %	18.8 C	43.8 %	16 C	0.1 Unit

*Used Equation Coefficients:

Batt: 0, 0.1, 0

OTemp: 0, 0.1, 0

OHumd: 0, 0.1, 0

BTemp: 0, 0.1, 0

X: 0, 0.1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)