N1ATP-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N1ATP-12. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1787526164	14 Pkts	14 Pkts	14 Pkts	43 C
1787522563	14 Pkts	14 Pkts	14 Pkts	43 C
1787518963	14 Pkts	14 Pkts	14 Pkts	42 C
1787515363	16 Pkts	16 Pkts	16 Pkts	42 C
1787511765	14 Pkts	14 Pkts	14 Pkts	42 C
1787508163	14 Pkts	14 Pkts	14 Pkts	42 C
1787504563	18 Pkts	18 Pkts	14 Pkts	43 C
1787500965	34 Pkts	34 Pkts	14 Pkts	42 C
1787497364	16 Pkts	16 Pkts	16 Pkts	42 C
1787493763	14 Pkts	14 Pkts	14 Pkts	43 C
1787486563	14 Pkts	14 Pkts	14 Pkts	43 C
1787482963	27 Pkts	20 Pkts	20 Pkts	43 C
1787479363	38 Pkts	20 Pkts	20 Pkts	42 C
1787475763	38 Pkts	20 Pkts	20 Pkts	43 C
1787472163	38 Pkts	20 Pkts	20 Pkts	43 C
1787468563	38 Pkts	20 Pkts	20 Pkts	43 C
1787464963	38 Pkts	20 Pkts	20 Pkts	42 C
1787461363	37 Pkts	19 Pkts	19 Pkts	42 C
1787457763	59 Pkts	41 Pkts	20 Pkts	43 C
1787454164	88 Pkts	69 Pkts	20 Pkts	43 C
1787450566	54 Pkts	36 Pkts	19 Pkts	42 C
1787446965	42 Pkts	24 Pkts	22 Pkts	43 C
1787443363	34 Pkts	24 Pkts	22 Pkts	42 C
1787439763	48 Pkts	30 Pkts	27 Pkts	43 C
1787436163	26 Pkts	17 Pkts	17 Pkts	42 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)