EL-EA1IPG Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-EA1IPG. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1772489219	0 RX Erlang	60 TX Erlang	0 RXcount/10m	4 TXcount/10m
1772488619	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1772488019	0 RX Erlang	17 TX Erlang	0 RXcount/10m	2 TXcount/10m
1772487419	0 RX Erlang	50 TX Erlang	0 RXcount/10m	3 TXcount/10m
1772486819	0 RX Erlang	2 TX Erlang	0 RXcount/10m	1 TXcount/10m
1772486219	0 RX Erlang	23 TX Erlang	0 RXcount/10m	2 TXcount/10m
1772485619	0 RX Erlang	100 TX Erlang	0 RXcount/10m	5 TXcount/10m
1772485019	0 RX Erlang	29 TX Erlang	0 RXcount/10m	3 TXcount/10m
1772484419	0 RX Erlang	16 TX Erlang	0 RXcount/10m	3 TXcount/10m
1772483819	0 RX Erlang	21 TX Erlang	0 RXcount/10m	3 TXcount/10m
1772483219	0 RX Erlang	57 TX Erlang	0 RXcount/10m	8 TXcount/10m
1772482619	0 RX Erlang	16 TX Erlang	0 RXcount/10m	1 TXcount/10m
1772482019	0 RX Erlang	116 TX Erlang	0 RXcount/10m	6 TXcount/10m
1772481419	0 RX Erlang	19 TX Erlang	0 RXcount/10m	4 TXcount/10m
1772480819	0 RX Erlang	427 TX Erlang	0 RXcount/10m	14 TXcount/10m
1772480219	0 RX Erlang	412 TX Erlang	0 RXcount/10m	5 TXcount/10m
1772479619	0 RX Erlang	876 TX Erlang	0 RXcount/10m	11 TXcount/10m
1772479019	0 RX Erlang	779 TX Erlang	0 RXcount/10m	13 TXcount/10m
1772478429	0 RX Erlang	901 TX Erlang	0 RXcount/10m	7 TXcount/10m
1772477820	0 RX Erlang	723 TX Erlang	0 RXcount/10m	13 TXcount/10m
1772477219	0 RX Erlang	589 TX Erlang	0 RXcount/10m	19 TXcount/10m
1772476619	0 RX Erlang	385 TX Erlang	0 RXcount/10m	13 TXcount/10m
1772476019	0 RX Erlang	537 TX Erlang	0 RXcount/10m	14 TXcount/10m
1772475419	0 RX Erlang	446 TX Erlang	0 RXcount/10m	15 TXcount/10m
1772465219	0 RX Erlang	74 TX Erlang	0 RXcount/10m	7 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)