KK4NTX-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4NTX-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1789929556	371 Pkts	370 Pkts	101 Pkts	35 C
1789925956	288 Pkts	285 Pkts	124 Pkts	35 C
1789922356	250 Pkts	249 Pkts	120 Pkts	35 C
1789918756	268 Pkts	267 Pkts	129 Pkts	35 C
1789915156	253 Pkts	251 Pkts	116 Pkts	35 C
1789911557	171 Pkts	168 Pkts	74 Pkts	35 C
1789907957	187 Pkts	186 Pkts	80 Pkts	35 C
1789904357	279 Pkts	277 Pkts	104 Pkts	35 C
1789900756	241 Pkts	239 Pkts	100 Pkts	35 C
1789897156	239 Pkts	238 Pkts	92 Pkts	35 C
1789893556	215 Pkts	213 Pkts	89 Pkts	35 C
1789889957	173 Pkts	172 Pkts	86 Pkts	36 C
1789886356	227 Pkts	223 Pkts	99 Pkts	35 C
1789882757	203 Pkts	201 Pkts	88 Pkts	36 C
1789875650	212 Pkts	211 Pkts	92 Pkts	36 C
1789872050	167 Pkts	164 Pkts	76 Pkts	36 C
1789868450	224 Pkts	224 Pkts	102 Pkts	36 C
1789864850	232 Pkts	231 Pkts	99 Pkts	36 C
1789861250	203 Pkts	201 Pkts	86 Pkts	36 C
1789857650	184 Pkts	183 Pkts	84 Pkts	36 C
1789854050	192 Pkts	191 Pkts	95 Pkts	36 C
1789850450	168 Pkts	167 Pkts	70 Pkts	36 C
1789846850	241 Pkts	240 Pkts	102 Pkts	36 C
1789843250	256 Pkts	255 Pkts	113 Pkts	36 C
1789839650	267 Pkts	266 Pkts	115 Pkts	36 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)