OK1FWG-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OK1FWG-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	Digi*	V_Bat*
1753633388	165 Count	289 Count	115 Count	3.85 VDC
1753631585	160 Count	280 Count	111 Count	3.91 VDC
1753629781	156 Count	270 Count	108 Count	3.87 VDC
1753627979	152 Count	255 Count	105 Count	3.86 VDC
1753626176	148 Count	240 Count	102 Count	3.88 VDC
1753622569	141 Count	212 Count	97 Count	3.86 VDC
1753620766	137 Count	198 Count	94 Count	3.93 VDC
1753617151	128 Count	171 Count	88 Count	3.89 VDC
1753615344	123 Count	155 Count	84 Count	3.87 VDC
1753613541	118 Count	141 Count	80 Count	3.89 VDC
1753611738	104 Count	116 Count	67 Count	3.9 VDC
1753609935	90 Count	97 Count	57 Count	3.93 VDC
1753608131	80 Count	80 Count	48 Count	3.84 VDC
1753606328	49 Count	43 Count	18 Count	3.87 VDC
1753604525	38 Count	26 Count	11 Count	3.86 VDC
1753602722	3 Count	10 Count	3 Count	3.86 VDC
1753600919	754 Count	1021 Count	510 Count	3.87 VDC
1753599116	728 Count	991 Count	485 Count	3.85 VDC
1753597312	725 Count	979 Count	483 Count	3.91 VDC
1753595509	720 Count	969 Count	481 Count	3.85 VDC
1753593706	717 Count	955 Count	479 Count	3.86 VDC
1753591902	713 Count	947 Count	476 Count	3.89 VDC
1753590099	710 Count	935 Count	474 Count	3.91 VDC
1753588449	707 Count	925 Count	472 Count	3.83 VDC
1753586646	704 Count	910 Count	470 Count	3.89 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)