DB1IAT-9 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB1IAT-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1753763540	1005.3 hPa	24.6 C deg	48.7 %	1018.4 hPa	0 C deg
1753761734	1005.2 hPa	24.5 C deg	48.9 %	1018.3 hPa	0 C deg
1753759934	1005.2 hPa	24.6 C deg	48.7 %	1018.3 hPa	0 C deg
1753758149	1005.3 hPa	24.7 C deg	48.7 %	1018.4 hPa	0 C deg
1753758134	1005.3 hPa	24.7 C deg	48.7 %	1018.4 hPa	0 C deg
1753756334	1005.2 hPa	24.7 C deg	48.6 %	1018.2 hPa	0 C deg
1753754546	1005.2 hPa	24.8 C deg	48.5 %	1018.3 hPa	0 C deg
1753752734	1005.4 hPa	24.8 C deg	48.5 %	1018.4 hPa	0 C deg
1753750933	1005.3 hPa	24.8 C deg	48.5 %	1018.3 hPa	0 C deg
1753749133	1005.2 hPa	24.9 C deg	48.3 %	1018.3 hPa	0 C deg
1753747333	1005.2 hPa	25.1 C deg	48 %	1018.2 hPa	0 C deg
1753745545	1005.1 hPa	25.2 C deg	47.8 %	1018.1 hPa	0 C deg
1753745532	1005.1 hPa	25.2 C deg	47.8 %	1018.1 hPa	0 C deg
1753741932	1005 hPa	25.3 C deg	47.4 %	1018 hPa	0 C deg
1753740131	1004.9 hPa	25.5 C deg	47 %	1018 hPa	0 C deg
1753738338	1004.9 hPa	25.6 C deg	46.9 %	1017.9 hPa	0 C deg
1753736553	1004.8 hPa	25.8 C deg	47.3 %	1017.9 hPa	0 C deg
1753734735	1004.7 hPa	25.8 C deg	47.2 %	1017.7 hPa	0 C deg
1753732941	1004.6 hPa	25.7 C deg	47.5 %	1017.6 hPa	0 C deg
1753731149	1004.2 hPa	25.5 C deg	47.4 %	1017.3 hPa	0 C deg
1753731142	1004.2 hPa	25.5 C deg	47.4 %	1017.3 hPa	0 C deg
1753729341	1003.7 hPa	25.8 C deg	46.7 %	1016.7 hPa	0 C deg
1753729329	1003.7 hPa	25.8 C deg	46.7 %	1016.7 hPa	0 C deg
1753725729	1003.3 hPa	26.4 C deg	45.3 %	1016.3 hPa	0 C deg
1753722143	1002.9 hPa	27.4 C deg	43 %	1015.8 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)