AI5TX-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object AI5TX-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1777341120	13.28 Volt	30 Pkt	10 Pkt	32 Pcnt
1777337520	13.28 Volt	10 Pkt	10 Pkt	24 Pcnt
1777333920	13.35 Volt	10 Pkt	10 Pkt	28 Pcnt
1777330320	13.28 Volt	10 Pkt	10 Pkt	32 Pcnt
1777326720	13.28 Volt	10 Pkt	0 Pkt	27 Pcnt
1777323120	13.28 Volt	10 Pkt	0 Pkt	25 Pcnt
1777319521	13.35 Volt	10 Pkt	10 Pkt	31 Pcnt
1777315921	13.35 Volt	10 Pkt	10 Pkt	30 Pcnt
1777312321	13.28 Volt	10 Pkt	10 Pkt	26 Pcnt
1777308721	13.35 Volt	10 Pkt	0 Pkt	21 Pcnt
1777305121	13.28 Volt	10 Pkt	10 Pkt	25 Pcnt
1777301521	13.28 Volt	20 Pkt	10 Pkt	19 Pcnt
1777297921	13.28 Volt	20 Pkt	0 Pkt	11 Pcnt
1777294321	13.28 Volt	20 Pkt	10 Pkt	12 Pcnt
1777290721	13.28 Volt	10 Pkt	0 Pkt	8 Pcnt
1777287121	13.35 Volt	10 Pkt	10 Pkt	15 Pcnt
1777283521	13.28 Volt	10 Pkt	0 Pkt	10 Pcnt
1777279922	13.28 Volt	10 Pkt	0 Pkt	9 Pcnt
1777276322	13.28 Volt	20 Pkt	10 Pkt	8 Pcnt
1777272722	13.35 Volt	20 Pkt	10 Pkt	7 Pcnt
1777269122	13.28 Volt	20 Pkt	10 Pkt	6 Pcnt
1777265522	13.28 Volt	10 Pkt	10 Pkt	5 Pcnt
1777261922	13.28 Volt	20 Pkt	10 Pkt	18 Pcnt
1777257376	13.28 Volt	10 Pkt	0 Pkt	26 Pcnt
1777253776	13.28 Volt	10 Pkt	0 Pkt	28 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)