DL1VED-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DL1VED-3. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1761404279	965 hPa	26.7 C deg	40.9 %	1003.3 hPa	0 C deg
1761402123	964.6 hPa	26.5 C deg	41 %	1002.8 hPa	0 C deg
1761402033	964.6 hPa	26.6 C deg	40.9 %	1002.8 hPa	0 C deg
1761401070	964.6 hPa	26.7 C deg	42.2 %	1002.8 hPa	0 C deg
1761400915	964.5 hPa	26.4 C deg	42.3 %	1002.7 hPa	0 C deg
1761400772	964.5 hPa	26 C deg	43.2 %	1002.8 hPa	0 C deg
1761400719	964.5 hPa	25.9 C deg	43.7 %	1002.8 hPa	0 C deg
1761400694	964.4 hPa	25.8 C deg	43.8 %	1002.7 hPa	0 C deg
1761400680	964.4 hPa	25.8 C deg	43.8 %	1002.7 hPa	0 C deg
1761400233	964.5 hPa	24.5 C deg	47.2 %	1003 hPa	0 C deg
1761400181	964.5 hPa	24.2 C deg	48 %	1003 hPa	0 C deg
1761400008	964.5 hPa	23.2 C deg	50.9 %	1003.2 hPa	0 C deg
1761399892	964.6 hPa	22.4 C deg	53.1 %	1003.4 hPa	0 C deg
1761399723	964.5 hPa	21.4 C deg	55.6 %	1003.4 hPa	0 C deg
1761321100	967.8 hPa	24.8 C deg	42.2 %	1006.4 hPa	0 C deg
1761321012	967.8 hPa	24 C deg	44 %	1006.5 hPa	0 C deg
1761320866	967.8 hPa	23.2 C deg	46.2 %	1006.7 hPa	0 C deg
1761320706	967.8 hPa	22.1 C deg	48.6 %	1006.7 hPa	0 C deg
1761234857	951.4 hPa	21.4 C deg	53.5 %	989.8 hPa	0 C deg
1761071070	961.7 hPa	21 C deg	54.5 %	1000.6 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)