VE7OGO-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VE7OGO-6. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1753731312	52	55	59	33	39
1753729516	70	57	58	33	39
1753727711	70	59	63	33	39
1753723123	60	59	61	33	39
1753721322	63	61	73	33	39
1753719521	62	59	62	33	40
1753717720	62	92	63	51	40
1753715920	59	59	63	33	39
1753714119	64	62	66	33	40
1753710515	62	60	63	33	39
1753708714	64	63	67	33	39
1753706913	60	60	65	33	39
1753705112	64	63	65	33	40
1753703312	73	63	68	33	40
1753701512	63	63	64	33	40
1753699711	63	61	63	33	39
1753697911	59	61	63	33	39
1753696123	67	62	65	33	40
1753694310	104	64	64	33	39
1753692510	62	62	64	33	39
1753690709	63	63	65	33	39
1753688908	62	63	66	33	40
1753687107	60	61	63	33	39
1753685307	81	59	65	33	39
1753684882	62	61	66	33	39

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)