HF7JOB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HF7JOB-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	TX*	RX*	V_Bat*	V_Ext*
1754095046	21 Count	0 Count	3.41 VDC	0 VDC
1754093245	20 Count	0 Count	3.44 VDC	0 VDC
1754091445	19 Count	0 Count	3.48 VDC	0 VDC
1754089644	18 Count	0 Count	3.52 VDC	0 VDC
1754087843	17 Count	0 Count	3.55 VDC	0 VDC
1754086043	16 Count	0 Count	3.55 VDC	0 VDC
1754084242	15 Count	0 Count	3.57 VDC	0 VDC
1754083446	14 Count	0 Count	3.57 VDC	0 VDC
1754081645	13 Count	0 Count	3.57 VDC	0 VDC
1754079845	12 Count	0 Count	3.6 VDC	0 VDC
1754076243	10 Count	0 Count	3.62 VDC	0 VDC
1754074442	9 Count	0 Count	3.64 VDC	0 VDC
1754072641	8 Count	0 Count	3.64 VDC	0 VDC
1754070840	7 Count	0 Count	3.68 VDC	0 VDC
1754070804	6 Count	0 Count	3.67 VDC	0 VDC
1754070738	4 Count	0 Count	3.66 VDC	0.14 VDC
1754069683	3 Count	0 Count	3.67 VDC	0.14 VDC
1754068788	2 Count	0 Count	3.76 VDC	0.14 VDC
1754066985	1 Count	0 Count	3.53 VDC	0.14 VDC
1754066914	0 Count	0 Count	4.23 VDC	0.14 VDC
1753996002	348 Count	33 Count	0 VDC	0 VDC
1753995988	348 Count	33 Count	0 VDC	0 VDC
1753995074	350 Count	0 Count	0 VDC	0 VDC
1753995036	426 Count	0 Count	0 VDC	0 VDC
1753995004	425 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)