DF8RD-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF8RD-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1787583642	961.4 hPa	30.5 C deg	1018.4 hPa	0 C deg
1787581814	962.1 hPa	30.4 C deg	1019.2 hPa	0 C deg
1787579985	962.2 hPa	30.5 C deg	1019.2 hPa	0 C deg
1787578152	962.5 hPa	30.1 C deg	1019.6 hPa	0 C deg
1787576324	962.9 hPa	29.8 C deg	1020.1 hPa	0 C deg
1787574492	963.2 hPa	29.5 C deg	1020.5 hPa	0 C deg
1787572662	963.3 hPa	29.3 C deg	1020.7 hPa	0 C deg
1787569005	963.8 hPa	28.7 C deg	1021.2 hPa	0 C deg
1787565345	964.3 hPa	28.2 C deg	1022 hPa	0 C deg
1787563518	964.5 hPa	28 C deg	1022.2 hPa	0 C deg
1787561805	964.7 hPa	27.7 C deg	1022.4 hPa	0 C deg
1787558023	964.8 hPa	27.1 C deg	1022.7 hPa	0 C deg
1787556202	964.9 hPa	27 C deg	1022.8 hPa	0 C deg
1787554368	965 hPa	26.7 C deg	1023 hPa	0 C deg
1787552535	965.1 hPa	26.4 C deg	1023.2 hPa	0 C deg
1787550701	965.1 hPa	26.3 C deg	1023.1 hPa	0 C deg
1787547042	965.1 hPa	26.3 C deg	1023.1 hPa	0 C deg
1787543381	965.2 hPa	26.1 C deg	1023.3 hPa	0 C deg
1787541552	965 hPa	26.1 C deg	1023.1 hPa	0 C deg
1787539723	965 hPa	26.3 C deg	1023.1 hPa	0 C deg
1787537894	965 hPa	26.4 C deg	1023.1 hPa	0 C deg
1787536069	965.1 hPa	26.5 C deg	1023.2 hPa	0 C deg
1787534238	965 hPa	26.6 C deg	1023 hPa	0 C deg
1787532407	965.2 hPa	26.7 C deg	1023.1 hPa	0 C deg
1787530576	965.3 hPa	26.9 C deg	1023.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)