OE1UHA-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE1UHA-13. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1772517603	80 C	94 C	166 %	18 nS/h	51 %
1772514003	79 C	94 C	165 %	18 nS/h	51 %
1772510402	81 C	95 C	165 %	21 nS/h	51 %
1772506802	82 C	95 C	164 %	18 nS/h	51 %
1772503202	82 C	96 C	164 %	16 nS/h	51 %
1772499602	82 C	97 C	164 %	20 nS/h	51 %
1772496002	84 C	97 C	165 %	18 nS/h	51 %
1772492402	85 C	98 C	165 %	17 nS/h	51 %
1772488803	89 C	99 C	165 %	17 nS/h	51 %
1772485203	92 C	100 C	156 %	16 nS/h	51 %
1772481602	95 C	101 C	156 %	17 nS/h	51 %
1772478002	98 C	102 C	157 %	18 nS/h	51 %
1772474401	104 C	103 C	158 %	18 nS/h	51 %
1772470801	115 C	104 C	157 %	18 nS/h	51 %
1772467201	117 C	104 C	159 %	18 nS/h	51 %
1772463601	118 C	104 C	161 %	23 nS/h	48 %
1772460001	121 C	103 C	166 %	16 nS/h	43 %
1772456401	124 C	103 C	162 %	19 nS/h	31 %
1772452801	118 C	102 C	160 %	18 nS/h	13 %
1772445606	116 C	101 C	164 %	15 nS/h	51 %
1772442006	109 C	100 C	166 %	17 nS/h	48 %
1772438405	105 C	100 C	160 %	16 nS/h	41 %
1772434805	104 C	100 C	157 %	18 nS/h	41 %
1772431205	104 C	100 C	163 %	19 nS/h	41 %
1772427605	105 C	100 C	163 %	20 nS/h	41 %

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)