DB1IAT-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DB1IAT-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	Hum*	QNH*	Temp.out*
1754988529	1004.5 hPa	29.4 C deg	38.7 %	1059.5 hPa	0 C deg
1754984935	1004.5 hPa	29.1 C deg	38.2 %	1059.6 hPa	0 C deg
1754984928	1004.5 hPa	29.1 C deg	38.2 %	1059.6 hPa	0 C deg
1754983141	1004.6 hPa	29 C deg	38 %	1059.8 hPa	0 C deg
1754983134	1004.6 hPa	29 C deg	38 %	1059.8 hPa	0 C deg
1754981330	1004.6 hPa	28.9 C deg	37.7 %	1059.8 hPa	0 C deg
1754975943	1004.6 hPa	28.9 C deg	37.7 %	1059.8 hPa	0 C deg
1754975929	1004.6 hPa	28.9 C deg	37.7 %	1059.8 hPa	0 C deg
1754974128	1004.5 hPa	29 C deg	38.3 %	1059.7 hPa	0 C deg
1754972345	1004.2 hPa	29.1 C deg	38.4 %	1059.4 hPa	0 C deg
1754972328	1004.2 hPa	29.1 C deg	38.4 %	1059.4 hPa	0 C deg
1754970546	1004.2 hPa	29.1 C deg	38.4 %	1059.3 hPa	0 C deg
1754970527	1004.2 hPa	29.1 C deg	38.4 %	1059.3 hPa	0 C deg
1754966927	1004.5 hPa	29.2 C deg	38.4 %	1059.6 hPa	0 C deg
1754965133	1004.6 hPa	29.3 C deg	38.3 %	1059.7 hPa	0 C deg
1754965127	1004.6 hPa	29.3 C deg	38.3 %	1059.7 hPa	0 C deg
1754963342	1004.5 hPa	29.4 C deg	38.2 %	1059.6 hPa	0 C deg
1754963333	1004.5 hPa	29.4 C deg	38.2 %	1059.6 hPa	0 C deg
1754961539	1004.6 hPa	29.4 C deg	38 %	1059.7 hPa	0 C deg
1754961527	1004.6 hPa	29.4 C deg	38 %	1059.7 hPa	0 C deg
1754959746	1004.8 hPa	29.5 C deg	38 %	1059.8 hPa	0 C deg
1754959733	1004.8 hPa	29.5 C deg	38 %	1059.8 hPa	0 C deg
1754957927	1004.9 hPa	29.5 C deg	38 %	1059.9 hPa	0 C deg
1754956127	1005 hPa	29.6 C deg	37.9 %	1060.1 hPa	0 C deg
1754954356	1005.2 hPa	29.6 C deg	37.8 %	1060.2 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)