IQ9DM-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IQ9DM-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxPkt*	TxPkt*	Batt*
1754259347	22 Pkt/10m	20 Pkt/10m	3.98 Volt
1754258143	22 Pkt/10m	16 Pkt/10m	4.02 Volt
1754256940	17 Pkt/10m	16 Pkt/10m	3.98 Volt
1754255735	19 Pkt/10m	17 Pkt/10m	4 Volt
1754254532	16 Pkt/10m	11 Pkt/10m	4 Volt
1754253328	19 Pkt/10m	18 Pkt/10m	4 Volt
1754252124	27 Pkt/10m	23 Pkt/10m	3.98 Volt
1754250921	11 Pkt/10m	9 Pkt/10m	4 Volt
1754249716	46 Pkt/10m	45 Pkt/10m	3.98 Volt
1754247308	24 Pkt/10m	21 Pkt/10m	4 Volt
1754246105	22 Pkt/10m	19 Pkt/10m	4 Volt
1754244925	22 Pkt/10m	17 Pkt/10m	4 Volt
1754243697	17 Pkt/10m	12 Pkt/10m	3.98 Volt
1754242493	55 Pkt/10m	53 Pkt/10m	3.98 Volt
1754241290	21 Pkt/10m	19 Pkt/10m	4 Volt
1754240086	21 Pkt/10m	17 Pkt/10m	4 Volt
1754238882	26 Pkt/10m	23 Pkt/10m	4.02 Volt
1754237678	22 Pkt/10m	17 Pkt/10m	3.98 Volt
1754236475	21 Pkt/10m	16 Pkt/10m	4 Volt
1754235271	36 Pkt/10m	35 Pkt/10m	4 Volt
1754234067	30 Pkt/10m	29 Pkt/10m	4 Volt
1754232863	22 Pkt/10m	16 Pkt/10m	4.02 Volt
1754231659	22 Pkt/10m	19 Pkt/10m	4 Volt
1754230455	23 Pkt/10m	23 Pkt/10m	4 Volt
1754229252	16 Pkt/10m	14 Pkt/10m	4.02 Volt

*Used Equation Coefficients:

RxPkt: 0, 1, 0

TxPkt: 0, 1, 0

Batt: 0, 0.0196, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)