9W8AKN-A Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W8AKN-A. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1777616910	34 Pkt	0 Pkt	-83 dBm	5.17 V
1777615081	30 Pkt	0 Pkt	-83 dBm	5.17 V
1777613252	36 Pkt	1 Pkt	-86 dBm	5.13 V
1777611422	32 Pkt	1 Pkt	-83 dBm	5.13 V
1777609594	32 Pkt	3 Pkt	-80 dBm	5.13 V
1777607766	36 Pkt	1 Pkt	-82 dBm	5.17 V
1777605937	36 Pkt	0 Pkt	-81 dBm	5.17 V
1777604108	35 Pkt	2 Pkt	-82 dBm	5.11 V
1777602281	34 Pkt	0 Pkt	-83 dBm	5.13 V
1777600452	35 Pkt	1 Pkt	-81 dBm	5.17 V
1777598629	34 Pkt	1 Pkt	-93 dBm	5.13 V
1777596795	34 Pkt	1 Pkt	-78 dBm	5.13 V
1777594967	3 Pkt	0 Pkt	-78 dBm	5.17 V
1777594184	37 Pkt	0 Pkt	-79 dBm	5.13 V
1777592356	29 Pkt	0 Pkt	-74 dBm	5.17 V
1777590528	26 Pkt	1 Pkt	-74 dBm	5.13 V
1777588700	24 Pkt	1 Pkt	-76 dBm	5.17 V
1777586872	19 Pkt	0 Pkt	-77 dBm	5.11 V
1777585255	27 Pkt	0 Pkt	-81 dBm	5.13 V
1777583428	32 Pkt	0 Pkt	-81 dBm	5.17 V
1777581599	25 Pkt	0 Pkt	-78 dBm	5.13 V
1777579771	29 Pkt	1 Pkt	-77 dBm	5.17 V
1777577943	29 Pkt	1 Pkt	-79 dBm	5.17 V
1777576116	27 Pkt	1 Pkt	-77 dBm	5.17 V
1777574287	31 Pkt	2 Pkt	-80 dBm	5.17 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)