This is the latest recevied telemetry packets stored in our database for station/object ON7KEI-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Vin*
Rx1h*
Deff1h*
Eff1h*
Temp*
1787585711
13.91 Volt
80 Pkt
40 Pkt
46 Pcnt
19.06 C
1787583909
13.91 Volt
50 Pkt
30 Pkt
41 Pcnt
18.98 C
1787582108
13.91 Volt
40 Pkt
20 Pkt
37 Pcnt
18.98 C
1787580306
13.91 Volt
30 Pkt
20 Pkt
29 Pcnt
18.91 C
1787578504
13.91 Volt
10 Pkt
10 Pkt
14 Pcnt
18.91 C
1787576702
13.91 Volt
10 Pkt
0 Pkt
11 Pcnt
18.98 C
1787574901
13.91 Volt
20 Pkt
10 Pkt
26 Pcnt
18.91 C
1787573099
13.91 Volt
30 Pkt
20 Pkt
29 Pcnt
18.91 C
1787571297
13.91 Volt
20 Pkt
10 Pkt
25 Pcnt
18.91 C
1787569495
13.91 Volt
20 Pkt
10 Pkt
27 Pcnt
18.91 C
1787567693
13.91 Volt
40 Pkt
20 Pkt
42 Pcnt
18.91 C
1787565892
13.91 Volt
30 Pkt
20 Pkt
50 Pcnt
18.76 C
1787564090
13.91 Volt
0 Pkt
0 Pkt
100 Pcnt
18.45 C
1787563938
13.91 Volt
0 Pkt
0 Pkt
100 Pcnt
18.45 C
1787563406
13.91 Volt
0 Pkt
0 Pkt
100 Pcnt
18.45 C
*Used Equation Coefficients:
Vin: 0, 0.076, 0
Rx1h: 0, 10, 0
Deff1h: 0, 10, 0
Eff1h: 0, 1, 0
Temp: 0, 0.076, 5
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)