BR9UN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BR9UN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*	Value5*
1761546820	0.54 Load	59 DegC	657 Mb	2042 Pkt	769 Pkt
1761546519	0.56 Load	59 DegC	657 Mb	2226 Pkt	769 Pkt
1761546220	0.59 Load	59 DegC	661 Mb	2126 Pkt	770 Pkt
1761545919	0.58 Load	59 DegC	658 Mb	2128 Pkt	767 Pkt
1761545620	0.59 Load	59 DegC	660 Mb	2151 Pkt	772 Pkt
1761545319	0.54 Load	60 DegC	660 Mb	2271 Pkt	766 Pkt
1761545020	0.51 Load	59 DegC	657 Mb	2147 Pkt	784 Pkt
1761544719	0.54 Load	59 DegC	659 Mb	2154 Pkt	773 Pkt
1761544420	0.51 Load	58 DegC	660 Mb	2364 Pkt	779 Pkt
1761544119	0.55 Load	60 DegC	657 Mb	1922 Pkt	763 Pkt
1761543820	0.55 Load	59 DegC	657 Mb	2089 Pkt	769 Pkt
1761543519	0.54 Load	59 DegC	657 Mb	1779 Pkt	768 Pkt
1761543220	0.54 Load	59 DegC	659 Mb	2031 Pkt	773 Pkt
1761542919	0.56 Load	59 DegC	658 Mb	1532 Pkt	695 Pkt
1761542620	0.57 Load	59 DegC	655 Mb	909 Pkt	671 Pkt
1761542319	0.55 Load	58 DegC	657 Mb	978 Pkt	660 Pkt
1761542020	0.53 Load	60 DegC	659 Mb	1055 Pkt	659 Pkt
1761541719	0.55 Load	59 DegC	658 Mb	956 Pkt	666 Pkt
1761541420	0.53 Load	58 DegC	658 Mb	983 Pkt	678 Pkt
1761541119	0.57 Load	59 DegC	657 Mb	1155 Pkt	654 Pkt
1761540820	0.57 Load	58 DegC	658 Mb	980 Pkt	661 Pkt
1761540519	0.56 Load	59 DegC	657 Mb	1049 Pkt	656 Pkt
1761540220	0.55 Load	58 DegC	660 Mb	946 Pkt	653 Pkt
1761539919	0.58 Load	59 DegC	657 Mb	890 Pkt	649 Pkt
1761539620	0.56 Load	58 DegC	658 Mb	975 Pkt	676 Pkt

*Used Equation Coefficients:

Value1: 0, 0.001, 0

Value2: 0, 0.001, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)