KE7EX-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KE7EX-15. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Value2*	Value3*	Value4*	Value5*
1788640557	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788640257	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788639957	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788639657	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788639357	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788639057	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788638757	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788638457	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788638157	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788637858	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788637557	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788637258	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788636986	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788636658	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788636358	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788636058	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788635758	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788635458	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788634858	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788634558	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788634258	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788633958	24 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788633658	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788633358	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None
1788633058	24.5 C	0 Pkt	0 Pkt	0 Pcnt	0 None

*Used Equation Coefficients:

Temp: 0, 0.5, -68.5

Value2: 0, 10, 0

Value3: 0, 10, 0

Value4: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)