ER-IR7BTT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ER-IR7BTT. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1754406917	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754404518	0.01 RX Erlang	0.07 TX Erlang	6 RXcount/10m	12 TXcount/10m
1754403317	0.01 RX Erlang	0.15 TX Erlang	2 RXcount/10m	13 TXcount/10m
1754402717	0.04 RX Erlang	0.07 TX Erlang	8 RXcount/10m	13 TXcount/10m
1754399717	0.01 RX Erlang	0.01 TX Erlang	2 RXcount/10m	2 TXcount/10m
1754398517	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754397317	0.01 RX Erlang	0.05 TX Erlang	4 RXcount/10m	9 TXcount/10m
1754396717	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754396117	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754394917	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754390306	0.01 RX Erlang	0.13 TX Erlang	5 RXcount/10m	7 TXcount/10m
1754389542	0.25 RX Erlang	0.27 TX Erlang	12 RXcount/10m	25 TXcount/10m
1754388942	0.01 RX Erlang	0.05 TX Erlang	6 RXcount/10m	12 TXcount/10m
1754388342	0.02 RX Erlang	0.11 TX Erlang	13 RXcount/10m	15 TXcount/10m
1754387742	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754386542	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m
1754385942	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754385342	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754384742	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m
1754384142	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754383542	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754382942	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m
1754382342	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754381742	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1754381142	0 RX Erlang	0.03 TX Erlang	0 RXcount/10m	1 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)