EL-HB9NCZ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-HB9NCZ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Value1*	Value2*	Value3*	Value4*
1765552093	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	9 TXcount/10m
1765551493	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	8 TXcount/10m
1765549979	0 RX Erlang	0.68 TX Erlang	0 RXcount/10m	14 TXcount/10m
1765548198	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765536850	0 RX Erlang	0.02 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765532952	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	13 TXcount/10m
1765532353	0 RX Erlang	0.92 TX Erlang	0 RXcount/10m	8 TXcount/10m
1765531153	0 RX Erlang	0.48 TX Erlang	0 RXcount/10m	8 TXcount/10m
1765530552	0 RX Erlang	0.58 TX Erlang	0 RXcount/10m	12 TXcount/10m
1765529952	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	10 TXcount/10m
1765528752	0 RX Erlang	0.58 TX Erlang	0 RXcount/10m	7 TXcount/10m
1765528152	0 RX Erlang	0.4 TX Erlang	0 RXcount/10m	11 TXcount/10m
1765527552	0 RX Erlang	0.13 TX Erlang	0 RXcount/10m	6 TXcount/10m
1765526952	0 RX Erlang	0.05 TX Erlang	0 RXcount/10m	2 TXcount/10m
1765525752	0 RX Erlang	0.2 TX Erlang	0 RXcount/10m	4 TXcount/10m
1765523417	0 RX Erlang	0.23 TX Erlang	0 RXcount/10m	5 TXcount/10m
1765482012	0 RX Erlang	0.86 TX Erlang	0 RXcount/10m	8 TXcount/10m
1765480886	0 RX Erlang	0.94 TX Erlang	0 RXcount/10m	8 TXcount/10m
1765478643	0 RX Erlang	0.01 TX Erlang	0 RXcount/10m	1 TXcount/10m
1765473825	0 RX Erlang	0.96 TX Erlang	0 RXcount/10m	10 TXcount/10m
1765473225	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	13 TXcount/10m
1765472625	0 RX Erlang	0.39 TX Erlang	0 RXcount/10m	23 TXcount/10m
1765472025	0 RX Erlang	0.08 TX Erlang	0 RXcount/10m	5 TXcount/10m
1765470825	0 RX Erlang	0.11 TX Erlang	0 RXcount/10m	13 TXcount/10m
1765470225	0 RX Erlang	0.11 TX Erlang	0 RXcount/10m	9 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)