OH5RDD-4 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5RDD-4. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1761628909	0.28 Load	52.08 DegC	178 Mb	257 Pkt	148 Pkt
1761628609	0.26 Load	52.08 DegC	173 Mb	257 Pkt	141 Pkt
1761628309	0.3 Load	52.08 DegC	173 Mb	240 Pkt	140 Pkt
1761628009	0.32 Load	52.62 DegC	169 Mb	247 Pkt	145 Pkt
1761627709	0.32 Load	52.62 DegC	178 Mb	258 Pkt	148 Pkt
1761627409	0.27 Load	52.08 DegC	173 Mb	268 Pkt	154 Pkt
1761627109	0.24 Load	52.08 DegC	169 Mb	254 Pkt	153 Pkt
1761626809	0.25 Load	52.08 DegC	174 Mb	250 Pkt	148 Pkt
1761626509	0.25 Load	52.62 DegC	171 Mb	259 Pkt	148 Pkt
1761626209	0.28 Load	52.62 DegC	172 Mb	263 Pkt	146 Pkt
1761625909	0.32 Load	52.62 DegC	175 Mb	253 Pkt	153 Pkt
1761625609	0.24 Load	52.08 DegC	175 Mb	245 Pkt	139 Pkt
1761625309	0.31 Load	52.08 DegC	176 Mb	254 Pkt	146 Pkt
1761625009	0.36 Load	52.08 DegC	178 Mb	260 Pkt	144 Pkt
1761624709	0.24 Load	52.08 DegC	171 Mb	244 Pkt	145 Pkt
1761624409	0.26 Load	51.54 DegC	172 Mb	247 Pkt	143 Pkt
1761624109	0.25 Load	52.62 DegC	176 Mb	257 Pkt	147 Pkt
1761623809	0.22 Load	52.62 DegC	176 Mb	259 Pkt	146 Pkt
1761623509	0.27 Load	52.08 DegC	175 Mb	251 Pkt	149 Pkt
1761623209	0.21 Load	52.08 DegC	174 Mb	247 Pkt	145 Pkt
1761622909	0.23 Load	52.08 DegC	174 Mb	266 Pkt	153 Pkt
1761622609	0.28 Load	52.62 DegC	171 Mb	265 Pkt	149 Pkt
1761622309	0.24 Load	52.08 DegC	176 Mb	251 Pkt	151 Pkt
1761622009	0.29 Load	52.08 DegC	178 Mb	258 Pkt	151 Pkt
1761621709	0.33 Load	51.54 DegC	175 Mb	258 Pkt	151 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)