OH5RBG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5RBG-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1773051896	0.27 Load	25 DegC	210 Mb	354 Pkt	355 Pkt
1773051597	0.3 Load	25 DegC	201 Mb	307 Pkt	308 Pkt
1773051296	0.33 Load	25 DegC	194 Mb	1015 Pkt	615 Pkt
1773050997	0.21 Load	25 DegC	420 Mb	354 Pkt	357 Pkt
1773050696	0.25 Load	25 DegC	420 Mb	334 Pkt	336 Pkt
1773050397	0.19 Load	25 DegC	429 Mb	308 Pkt	309 Pkt
1773050096	0.18 Load	25 DegC	431 Mb	354 Pkt	357 Pkt
1773049798	0.22 Load	25 DegC	422 Mb	320 Pkt	321 Pkt
1773049496	0.22 Load	25 DegC	422 Mb	1679 Pkt	818 Pkt
1773049197	0.26 Load	25 DegC	312 Mb	363 Pkt	362 Pkt
1773048897	0.27 Load	25 DegC	305 Mb	322 Pkt	323 Pkt
1773048597	0.2 Load	25 DegC	306 Mb	339 Pkt	340 Pkt
1773048296	0.21 Load	25 DegC	306 Mb	376 Pkt	377 Pkt
1773047996	0.19 Load	25 DegC	314 Mb	319 Pkt	321 Pkt
1773047697	0.19 Load	25 DegC	312 Mb	300 Pkt	301 Pkt
1773047396	0.23 Load	25 DegC	312 Mb	338 Pkt	341 Pkt
1773047097	0.24 Load	25 DegC	311 Mb	370 Pkt	371 Pkt
1773046796	0.24 Load	25 DegC	315 Mb	307 Pkt	308 Pkt
1773046497	0.22 Load	25 DegC	296 Mb	287 Pkt	288 Pkt
1773046196	0.2 Load	25 DegC	297 Mb	347 Pkt	349 Pkt
1773045897	0.19 Load	25 DegC	297 Mb	304 Pkt	305 Pkt
1773045596	0.2 Load	25 DegC	307 Mb	316 Pkt	316 Pkt
1773045297	0.22 Load	25 DegC	297 Mb	362 Pkt	363 Pkt
1773044996	0.21 Load	25 DegC	298 Mb	319 Pkt	321 Pkt
1773044697	0.22 Load	25 DegC	298 Mb	308 Pkt	309 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)