OH5RUG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OH5RUG-2. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Cpu*	Temp*	FreeM*	RxP*	TxP*
1773384387	1.1 Load	53.69 DegC	115 Mb	160 Pkt	160 Pkt
1773384087	1.09 Load	54.77 DegC	119 Mb	471 Pkt	441 Pkt
1773383788	1.12 Load	54.23 DegC	114 Mb	149 Pkt	149 Pkt
1773383487	1.15 Load	54.77 DegC	115 Mb	470 Pkt	445 Pkt
1773383187	1.09 Load	54.23 DegC	120 Mb	151 Pkt	153 Pkt
1773382887	1.1 Load	54.77 DegC	116 Mb	465 Pkt	450 Pkt
1773382587	1.09 Load	54.23 DegC	114 Mb	152 Pkt	153 Pkt
1773382287	1.09 Load	54.77 DegC	118 Mb	475 Pkt	422 Pkt
1773381987	1.12 Load	54.23 DegC	115 Mb	146 Pkt	146 Pkt
1773381687	1.11 Load	54.77 DegC	117 Mb	462 Pkt	444 Pkt
1773381387	1.08 Load	54.77 DegC	114 Mb	151 Pkt	151 Pkt
1773381087	1.1 Load	54.77 DegC	116 Mb	469 Pkt	440 Pkt
1773380787	1.07 Load	53.69 DegC	118 Mb	151 Pkt	152 Pkt
1773380487	1.09 Load	54.23 DegC	118 Mb	470 Pkt	448 Pkt
1773380188	1.04 Load	54.77 DegC	116 Mb	155 Pkt	156 Pkt
1773379887	1.13 Load	54.77 DegC	113 Mb	468 Pkt	432 Pkt
1773379587	1.09 Load	54.77 DegC	114 Mb	151 Pkt	152 Pkt
1773379288	1.16 Load	54.23 DegC	117 Mb	465 Pkt	441 Pkt
1773378987	1.06 Load	54.77 DegC	117 Mb	154 Pkt	155 Pkt
1773378687	1.12 Load	54.23 DegC	118 Mb	471 Pkt	448 Pkt
1773378387	1.13 Load	54.23 DegC	117 Mb	153 Pkt	154 Pkt
1773378088	1.2 Load	54.77 DegC	119 Mb	472 Pkt	443 Pkt
1773377796	1.12 Load	53.69 DegC	116 Mb	151 Pkt	152 Pkt
1773377487	1.11 Load	54.23 DegC	115 Mb	469 Pkt	452 Pkt
1773377188	1.06 Load	54.77 DegC	115 Mb	153 Pkt	154 Pkt

*Used Equation Coefficients:

Cpu: 0, 0.001, 0

Temp: 0, 0.001, 0

FreeM: 0, 1, 0

RxP: 0, 1, 0

TxP: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)