YB0RWN Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YB0RWN. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp.*	Humidity*	Pressure*
1772693733	35 °C	40 %RH	1004 hPa
1772691883	33 °C	44 %RH	1004 hPa
1772690033	30 °C	48 %RH	1005 hPa
1772688183	32 °C	45 %RH	1006 hPa
1772686333	35 °C	40 %RH	1006 hPa
1772684483	35 °C	41 %RH	1006 hPa
1772682633	32 °C	46 %RH	1007 hPa
1772680783	30 °C	50 %RH	1007 hPa
1772678930	30 °C	49 %RH	1007 hPa
1772677083	32 °C	44 %RH	1007 hPa
1772675071	33 °C	43 %RH	1007 hPa
1772673221	33 °C	42 %RH	1006 hPa
1772671371	32 °C	43 %RH	1006 hPa
1772669521	32 °C	45 %RH	1006 hPa
1772665822	31 °C	46 %RH	1005 hPa
1772663971	31 °C	46 %RH	1005 hPa
1772662121	31 °C	46 %RH	1005 hPa
1772656571	31 °C	46 %RH	1004 hPa
1772652872	30 °C	46 %RH	1005 hPa
1772651022	31 °C	46 %RH	1005 hPa
1772649172	31 °C	46 %RH	1005 hPa
1772649005	31 °C	47 %RH	1005 hPa
1772648467	31 °C	47 %RH	1005 hPa
1772648006	31 °C	47 %RH	1005 hPa
1772646156	31 °C	45 %RH	1006 hPa

*Used Equation Coefficients:

Temp.: 0, 1, 0

Humidity: 0, 1, 0

Pressure: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)