This is the latest recevied telemetry packets stored in our database for station/object DG0ROB-9. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time
Temp*
Humi*
Baro*
Value4*
Value5*
1784467576
30 deg C
34.9 %
1016.3 hPa
0
0
1784466664
31.8 deg C
33.8 %
1013 hPa
0
0
1784465764
35.1 deg C
40.8 %
1017.4 hPa
0
0
1784464861
33.1 deg C
42.4 %
1017.6 hPa
0
0
1784463968
29.2 deg C
45 %
1018.2 hPa
0
0
1784463053
28.5 deg C
40.7 %
1018.2 hPa
0
0
1784462157
35.1 deg C
45 %
1013.2 hPa
0
0
1784461254
34.9 deg C
45.5 %
1013.4 hPa
0
0
1784460358
33.1 deg C
47.3 %
1013.6 hPa
0
0
1784459449
30.6 deg C
49.6 %
10140 hPa
0
0
1784458562
30.8 deg C
49.3 %
10140 hPa
0
0
1784457651
30.3 deg C
50.1 %
10138 hPa
0
0
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0). The sent equation coefficients is used in the equation: a * value2 + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)