N4CJR Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N4CJR. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1755708497	74 Pkts	74 Pkts	34 Pkts	21 C
1755697697	71 Pkts	71 Pkts	45 Pkts	22 C
1755694097	85 Pkts	85 Pkts	49 Pkts	21 C
1755679697	64 Pkts	64 Pkts	34 Pkts	22 C
1755672497	46 Pkts	46 Pkts	33 Pkts	22 C
1755668897	41 Pkts	41 Pkts	30 Pkts	21 C
1755654498	55 Pkts	55 Pkts	35 Pkts	22 C
1755650897	79 Pkts	78 Pkts	40 Pkts	22 C
1755611297	73 Pkts	72 Pkts	39 Pkts	22 C
1755600497	53 Pkts	52 Pkts	32 Pkts	22 C
1755593297	47 Pkts	47 Pkts	32 Pkts	22 C
1755589697	46 Pkts	46 Pkts	34 Pkts	22 C
1755575299	51 Pkts	51 Pkts	34 Pkts	22 C
1755488897	65 Pkts	65 Pkts	34 Pkts	22 C
1755445697	70 Pkts	68 Pkts	39 Pkts	21 C
1755442097	58 Pkts	57 Pkts	31 Pkts	21 C
1755434897	50 Pkts	50 Pkts	31 Pkts	21 C
1755416897	57 Pkts	57 Pkts	35 Pkts	21 C
1755413297	37 Pkts	37 Pkts	32 Pkts	21 C
1755409697	53 Pkts	53 Pkts	34 Pkts	21 C
1755312497	84 Pkts	80 Pkts	39 Pkts	21 C
1755298097	86 Pkts	84 Pkts	54 Pkts	22 C
1755290897	69 Pkts	68 Pkts	25 Pkts	21 C
1755262096	40 Pkts	39 Pkts	8 Pkts	21 C
1755254896	86 Pkts	86 Pkts	52 Pkts	21 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)