N4CJR-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N4CJR-0. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1755776881	73 Pkts	73 Pkts	36 Pkts	21 C
1755769681	95 Pkts	95 Pkts	42 Pkts	21 C
1755766081	86 Pkts	86 Pkts	40 Pkts	21 C
1755758881	93 Pkts	92 Pkts	43 Pkts	22 C
1755755281	98 Pkts	95 Pkts	42 Pkts	22 C
1755751681	85 Pkts	83 Pkts	45 Pkts	22 C
1755748081	84 Pkts	84 Pkts	47 Pkts	22 C
1755744482	70 Pkts	70 Pkts	40 Pkts	22 C
1755740881	80 Pkts	80 Pkts	43 Pkts	22 C
1755737281	80 Pkts	80 Pkts	43 Pkts	22 C
1755733681	117 Pkts	117 Pkts	72 Pkts	22 C
1755730082	53 Pkts	53 Pkts	37 Pkts	22 C
1755726482	87 Pkts	85 Pkts	50 Pkts	22 C
1755722881	91 Pkts	91 Pkts	43 Pkts	22 C
1755719281	82 Pkts	81 Pkts	41 Pkts	21 C
1755712081	99 Pkts	97 Pkts	48 Pkts	22 C
1755708482	74 Pkts	74 Pkts	34 Pkts	21 C
1755704881	53 Pkts	52 Pkts	34 Pkts	22 C
1755697681	71 Pkts	71 Pkts	45 Pkts	22 C
1755694081	85 Pkts	85 Pkts	49 Pkts	21 C
1755690482	82 Pkts	80 Pkts	37 Pkts	21 C
1755686881	84 Pkts	83 Pkts	47 Pkts	22 C
1755676081	58 Pkts	58 Pkts	33 Pkts	22 C
1755672481	46 Pkts	46 Pkts	33 Pkts	22 C
1755668881	41 Pkts	41 Pkts	30 Pkts	21 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)