DM2HB Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DM2HB. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Dg1h*	Rx1h*	Effall*	Vin*	Temp*
1788685946	0 Pkt	320 Pkt	87 Pcnt	11.99 Volt	32 C
1788682345	0 Pkt	290 Pkt	87 Pcnt	11.99 Volt	31.5 C
1788678744	10 Pkt	280 Pkt	87 Pcnt	11.99 Volt	31.5 C
1788675147	20 Pkt	220 Pkt	87 Pcnt	11.99 Volt	31.5 C
1788671545	10 Pkt	160 Pkt	88 Pcnt	11.99 Volt	31.5 C
1788667945	10 Pkt	140 Pkt	88 Pcnt	11.99 Volt	31.5 C
1788664345	10 Pkt	110 Pkt	88 Pcnt	11.91 Volt	32 C
1788660745	0 Pkt	80 Pkt	88 Pcnt	11.99 Volt	32 C
1788657145	0 Pkt	70 Pkt	88 Pcnt	11.99 Volt	32 C
1788653545	0 Pkt	60 Pkt	88 Pcnt	11.99 Volt	32.5 C
1788649945	0 Pkt	60 Pkt	88 Pcnt	11.99 Volt	32.5 C
1788646345	0 Pkt	90 Pkt	88 Pcnt	11.99 Volt	32.5 C
1788642745	0 Pkt	60 Pkt	88 Pcnt	11.99 Volt	32.5 C
1788639146	0 Pkt	50 Pkt	88 Pcnt	11.99 Volt	32.5 C
1788635545	0 Pkt	150 Pkt	88 Pcnt	11.99 Volt	32 C
1788631945	0 Pkt	150 Pkt	88 Pcnt	11.99 Volt	31 C
1788628345	10 Pkt	220 Pkt	88 Pcnt	11.99 Volt	32 C
1788624745	30 Pkt	340 Pkt	88 Pcnt	11.99 Volt	32 C
1788621145	0 Pkt	220 Pkt	88 Pcnt	11.99 Volt	31 C
1788617545	0 Pkt	200 Pkt	88 Pcnt	11.99 Volt	31 C
1788613946	10 Pkt	340 Pkt	88 Pcnt	11.99 Volt	30 C
1788610346	30 Pkt	350 Pkt	88 Pcnt	11.99 Volt	29.5 C
1788606747	0 Pkt	260 Pkt	88 Pcnt	11.99 Volt	29 C
1788603146	20 Pkt	350 Pkt	88 Pcnt	11.99 Volt	29 C
1788599547	10 Pkt	310 Pkt	88 Pcnt	11.77 Volt	30 C

*Used Equation Coefficients:

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Effall: 0, 1, 0

Vin: 0, 0.074, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)