F6HIC-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object F6HIC-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1756582538	64 Count	0 Count	0 Count	0 VDC	0 VDC
1756580737	63 Count	0 Count	0 Count	0 VDC	0 VDC
1756578937	62 Count	0 Count	0 Count	0 VDC	0 VDC
1756577136	61 Count	0 Count	0 Count	0 VDC	0 VDC
1756575344	60 Count	0 Count	0 Count	0 VDC	0 VDC
1756573543	59 Count	0 Count	0 Count	0 VDC	0 VDC
1756571742	58 Count	0 Count	0 Count	0 VDC	0 VDC
1756569942	57 Count	0 Count	0 Count	0 VDC	0 VDC
1756568141	56 Count	0 Count	0 Count	0 VDC	0 VDC
1756566340	55 Count	0 Count	0 Count	0 VDC	0 VDC
1756564540	54 Count	0 Count	0 Count	0 VDC	0 VDC
1756562739	53 Count	0 Count	0 Count	0 VDC	0 VDC
1756560938	52 Count	0 Count	0 Count	0 VDC	0 VDC
1756557337	50 Count	0 Count	0 Count	0 VDC	0 VDC
1756555536	49 Count	0 Count	0 Count	0 VDC	0 VDC
1756553743	48 Count	0 Count	0 Count	0 VDC	0 VDC
1756551943	47 Count	0 Count	0 Count	0 VDC	0 VDC
1756550142	46 Count	0 Count	0 Count	0 VDC	0 VDC
1756548341	45 Count	0 Count	0 Count	0 VDC	0 VDC
1756546541	44 Count	0 Count	0 Count	0 VDC	0 VDC
1756542939	42 Count	0 Count	0 Count	0 VDC	0 VDC
1756541145	41 Count	0 Count	0 Count	0 VDC	0 VDC
1756537537	39 Count	0 Count	0 Count	0 VDC	0 VDC
1756535736	38 Count	0 Count	0 Count	0 VDC	0 VDC
1756533936	37 Count	0 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)