N2KNK-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object N2KNK-8. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1781403651	13.5 Volt	130 Pkt	20 Pkt	60 Pcnt
1781403649	13.5 Volt	130 Pkt	20 Pkt	60 Pcnt
1781403349	13.5 Volt	130 Pkt	20 Pkt	61 Pcnt
1781403051	13.5 Volt	140 Pkt	20 Pkt	63 Pcnt
1781403049	13.5 Volt	140 Pkt	20 Pkt	63 Pcnt
1781402749	13.5 Volt	140 Pkt	20 Pkt	65 Pcnt
1781402451	13.5 Volt	140 Pkt	20 Pkt	67 Pcnt
1781402449	13.5 Volt	140 Pkt	20 Pkt	67 Pcnt
1781402149	13.58 Volt	140 Pkt	20 Pkt	67 Pcnt
1781401851	13.65 Volt	130 Pkt	20 Pkt	68 Pcnt
1781401849	13.65 Volt	130 Pkt	20 Pkt	68 Pcnt
1781401549	13.73 Volt	140 Pkt	20 Pkt	69 Pcnt
1781401251	13.8 Volt	140 Pkt	20 Pkt	67 Pcnt
1781401249	13.8 Volt	140 Pkt	20 Pkt	67 Pcnt
1781400949	13.88 Volt	120 Pkt	20 Pkt	65 Pcnt
1781400651	14.03 Volt	130 Pkt	20 Pkt	66 Pcnt
1781400649	14.03 Volt	130 Pkt	20 Pkt	66 Pcnt
1781400349	14.1 Volt	140 Pkt	20 Pkt	66 Pcnt
1781400051	14.1 Volt	140 Pkt	20 Pkt	65 Pcnt
1781400049	14.1 Volt	140 Pkt	20 Pkt	65 Pcnt
1781399749	14.1 Volt	150 Pkt	20 Pkt	66 Pcnt
1781399451	13.88 Volt	150 Pkt	20 Pkt	66 Pcnt
1781399449	13.88 Volt	150 Pkt	20 Pkt	66 Pcnt
1781399149	14.03 Volt	150 Pkt	20 Pkt	64 Pcnt
1781398851	14.03 Volt	150 Pkt	20 Pkt	65 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)