YU9OMT-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YU9OMT-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*	V_Bat*	V_Ext*
1776584315	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776582515	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776580715	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776578915	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776541900	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776540098	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776538303	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776536498	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776534698	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776532898	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776531098	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776529295	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776527495	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776525695	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776523895	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776522094	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776520294	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776518494	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776516694	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776514894	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776513094	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776511294	0 Count	249 Count	0 Count	0 VDC	0 VDC
1776509494	0 Count	239 Count	0 Count	0 VDC	0 VDC
1776508477	0 Count	227 Count	0 Count	0 VDC	0 VDC
1776495627	0 Count	227 Count	0 Count	0 VDC	0 VDC

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)