IR2BY Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IR2BY. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10m*	Rx1h*	Dg10m*	DgR*	Eff1h*
1773064572	11 Pkt	70 Pkt	0 Pkt	0.26 Pcnt	50 Pcnt
1773064272	9 Pkt	70 Pkt	0 Pkt	0.26 Pcnt	49 Pcnt
1773063971	11 Pkt	80 Pkt	0 Pkt	0.26 Pcnt	49 Pcnt
1773063671	12 Pkt	90 Pkt	0 Pkt	0.26 Pcnt	49 Pcnt
1773063371	8 Pkt	100 Pkt	0 Pkt	0.26 Pcnt	49 Pcnt
1773063071	8 Pkt	110 Pkt	0 Pkt	0.26 Pcnt	50 Pcnt
1773062770	10 Pkt	110 Pkt	0 Pkt	0.26 Pcnt	49 Pcnt
1773062470	14 Pkt	120 Pkt	0 Pkt	0.26 Pcnt	50 Pcnt
1773062170	14 Pkt	130 Pkt	0 Pkt	0.26 Pcnt	51 Pcnt
1773061870	13 Pkt	130 Pkt	0 Pkt	0.26 Pcnt	51 Pcnt
1773061269	12 Pkt	140 Pkt	0 Pkt	0.26 Pcnt	54 Pcnt
1773060969	22 Pkt	150 Pkt	0 Pkt	0.26 Pcnt	55 Pcnt
1773060668	24 Pkt	140 Pkt	0 Pkt	0.26 Pcnt	55 Pcnt
1773060368	27 Pkt	140 Pkt	0 Pkt	0.26 Pcnt	56 Pcnt
1773060068	33 Pkt	140 Pkt	0 Pkt	0.26 Pcnt	56 Pcnt
1773059767	23 Pkt	130 Pkt	0 Pkt	0.26 Pcnt	56 Pcnt
1773059467	13 Pkt	110 Pkt	4 Pkt	0.26 Pcnt	55 Pcnt
1773059167	20 Pkt	110 Pkt	8 Pkt	0.26 Pcnt	55 Pcnt
1773058867	24 Pkt	110 Pkt	8 Pkt	0.26 Pcnt	52 Pcnt
1773058566	23 Pkt	100 Pkt	2 Pkt	0.26 Pcnt	53 Pcnt
1773058266	19 Pkt	90 Pkt	0 Pkt	0.26 Pcnt	51 Pcnt
1773057966	20 Pkt	80 Pkt	0 Pkt	0.26 Pcnt	49 Pcnt
1773057665	14 Pkt	80 Pkt	0 Pkt	0.26 Pcnt	46 Pcnt
1773057365	16 Pkt	80 Pkt	0 Pkt	0.26 Pcnt	47 Pcnt
1773057065	14 Pkt	80 Pkt	0 Pkt	0.26 Pcnt	46 Pcnt

*Used Equation Coefficients:

Rx10m: 0, 1, 0

Rx1h: 0, 10, 0

Dg10m: 0, 1, 0

DgR: 0, 0.001, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)