EL-DG4UAJ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EL-DG4UAJ. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Value1*	Value2*	Value3*	Value4*
1755284924	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755284324	0 RX Erlang	0.5 TX Erlang	0 RXcount/10m	11 TXcount/10m
1755283724	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755283124	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755282524	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755281924	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755281324	0 RX Erlang	0.23 TX Erlang	0 RXcount/10m	8 TXcount/10m
1755280724	0 RX Erlang	0.93 TX Erlang	0 RXcount/10m	15 TXcount/10m
1755280124	0 RX Erlang	0.79 TX Erlang	0 RXcount/10m	32 TXcount/10m
1755278596	0 RX Erlang	0.91 TX Erlang	0 RXcount/10m	13 TXcount/10m
1755277396	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755276796	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755276196	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755273055	0.04 RX Erlang	0.5 TX Erlang	4 RXcount/10m	21 TXcount/10m
1755271855	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755271255	0.04 RX Erlang	0.12 TX Erlang	5 RXcount/10m	20 TXcount/10m
1755270114	0 RX Erlang	1 TX Erlang	0 RXcount/10m	1 TXcount/10m
1755268914	0 RX Erlang	0.95 TX Erlang	0 RXcount/10m	14 TXcount/10m
1755268314	0.01 RX Erlang	0.64 TX Erlang	1 RXcount/10m	15 TXcount/10m
1755267714	0.05 RX Erlang	0.07 TX Erlang	7 RXcount/10m	18 TXcount/10m
1755267114	0.02 RX Erlang	0.07 TX Erlang	2 RXcount/10m	15 TXcount/10m
1755196306	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m
1755195706	0 RX Erlang	0 TX Erlang	0 RXcount/10m	3 TXcount/10m
1755195106	0.1 RX Erlang	0.07 TX Erlang	4 RXcount/10m	20 TXcount/10m
1755193081	0 RX Erlang	0 TX Erlang	0 RXcount/10m	0 TXcount/10m

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)