DF8RD-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object DF8RD-1. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Press*	Temp.in*	QNH*	Temp.out*
1761521363	954 hPa	18.8 C deg	1016.7 hPa	0 C deg
1761519548	954.2 hPa	18.9 C deg	1017 hPa	0 C deg
1761517733	954.4 hPa	19 C deg	1017.2 hPa	0 C deg
1761515918	954.7 hPa	19 C deg	1017.4 hPa	0 C deg
1761514100	954.8 hPa	19.1 C deg	1017.5 hPa	0 C deg
1761512285	954.9 hPa	19.5 C deg	1017.5 hPa	0 C deg
1761510470	954.8 hPa	20.1 C deg	1017.3 hPa	0 C deg
1761508658	954.6 hPa	20.3 C deg	1017 hPa	0 C deg
1761506844	954.3 hPa	20.4 C deg	1016.7 hPa	0 C deg
1761505027	954.2 hPa	20.6 C deg	1016.5 hPa	0 C deg
1761499586	954.1 hPa	21.2 C deg	1016.3 hPa	0 C deg
1761497771	953.9 hPa	21.5 C deg	1016 hPa	0 C deg
1761495954	953.6 hPa	21.8 C deg	1015.6 hPa	0 C deg
1761494139	953.6 hPa	22.2 C deg	1015.6 hPa	0 C deg
1761492324	953.7 hPa	22.5 C deg	1015.6 hPa	0 C deg
1761490509	953.6 hPa	22.9 C deg	1015.4 hPa	0 C deg
1761488694	953.1 hPa	23.4 C deg	1014.8 hPa	0 C deg
1761486879	953.1 hPa	23.8 C deg	1014.6 hPa	0 C deg
1761485064	953 hPa	24.2 C deg	1014.5 hPa	0 C deg
1761479620	953 hPa	26 C deg	1014.1 hPa	0 C deg
1761477806	953.1 hPa	25.2 C deg	1014.4 hPa	0 C deg
1761475990	953.2 hPa	23.4 C deg	1014.9 hPa	0 C deg
1761474175	953 hPa	22.4 C deg	1014.9 hPa	0 C deg
1761472367	953.1 hPa	20.5 C deg	1015.4 hPa	0 C deg
1761470543	952.7 hPa	20.4 C deg	1015 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)